50 Spare Cotter Pins for traditional teddy bear making in sizes 18mm – 37mm

Our packs of 50 spare T-head cotter pins for traditional teddy bear making are available in sizes 18mm – 37mm.  The disks are made in the UK from BZP mild steel.

These are often used in traditional bear and toy making as part of a cotter pin joint set enablng your creation have moving arms, legs and head. Each joint usually needs 1 pin (that passes through 2 hardboard disks and, sometimes, 2 washers).  The shorter the pin, the smaller the bear!

• 18mm  (Long pin length = 18mm (3/4″), T Head = 4mm (1/16″), Pin width = 2mm (5/32″)
• 22mm   (Long pin length = 22mm (7/8″), T Head = 6mm (1/4″), Pin width = 2mm (5/32″)
• 30mm (Long pin length = 30mm (1 1/8″), T Head = 6mm (1/4″), Pin width = 2mm (5/32″)
• 33mm (Long pin length = 33mm (1 1/4″), T Head = 1cm (3/8″), Pin width = 3mm (1/8″)
• 37mm  (Long pin length = 37mm (1 3/8″), T Head = 1cm (3/8″), Pin width = 3mm (1/8″)

Please note, these packs only contain the cotter pins (however, the disks and washers are also available on our website and complete sets of cotter pin joints too).

If you are unsure how to insert cotter pin joints, we have produced a video tutorial in our ‘How to do it’ Section giving you clear instructions and showing you how easy they are to use.

PLEASE NOTE:  The photograph does not show 50 of this product, it is simply a visual guide to their appearance.